Interfacing the EasyCopy License Manager - AN3001i - OpenLM Software License Management
Israel +972 4 6308447         USA +1 866 806 2068        UK +44 20 8242 6492      JAPAN +81 3 45208991 担当:萩原

Interfacing the EasyCopy License Manager – AN3001i


OpenLM version 2.0 supports license monitoring of a wide, and ever growing variety of license managers.

This application note elaborates the steps required to configure OpenLM to interface the EasyCopy License Manager, and obtain reliable license reports and usage statistics. This capability is available for Easycopy versions 8.7.12 onward.

Introducing a new EasyCopy License Manager server:

In order to configure OpenLM to work with the EasyCopy License Manager, follow these procedures:


  1. Select the License Servers tab.

  2. Click Add.

  3. From the Type drop-down menu, select OpenLM Generic..

  4. Insert a description in the Description text box.

  5. Set the Time Zone to where the License Server physically sits.

  6. Submit an appropriate Hostname and Port numbers. For this server the Port number is insignificant. Submit any two-digit number. NOTE: The same number will need to be used in the OpenLM Broker configuration as well. See OpenLM Broker Configuration below.

  7. Is Triad Configuration: This configuration is reserved for FlexLM license managers only. Keep it unchecked.

  8. OpenLM Server queries license manager check box:

    • Checked (Default): The OpenLM Server actively queries the license manager.

    • Unchecked: Usage information is obtained solely by the OpenLM Broker installation on the License manager machine.

  9. Click Apply, and then consecutively the Restart now button. The EasyCopy Licence Manager server is now ready to interface with OpenLM.


OpenLM Broker Configuration

Please refer to the Application Note 2004b: OpenLM Broker Comprehensive installation guide version 1.8 document for general Broker configuration

  1. Set the OpenLM Server hostname to OpenLM_license_server.

  2. Set the Port number to its default of 7016.


  1. The License Servers characteristics are set exactly as they were using the information used on the OpenLM Server Configuration tool (listed above):

  2. Highlight the License Servers  and then click Add and then License Server above and submit a title for the License Manager. Click Apply.


  1. To add a Port, highlight the newly named License server, click on the easycopy_lm that sits under the License Server. Click Add and highlight Port and click OK.

  2. Using the information from the Server settings (listed above), enter same information for the Port Number and using the drop-down menu, select OpenLM_Generic. Click Apply and then OK.


  1. Open the Commands section and select data_entry.

  2. In the Command Line, type the following: “C:\Program Files (x86)\easycopy\eclic.exe” . The command is “eclic openlm” and it needs to be run from the location of the eclic.exe path.


  1. Click the ‘execute’ button to check the operation of the Data Inquiry.

  2. Click the ‘Apply’ and “Restart Broker” buttons.