---
title: NI VLM
description: Configure OpenLM Broker in OpenLM Version 26 to monitor NI Volume License Manager, including the disconnected licenses that nivlmcmd.exe exports, and approve the license server in EasyAdmin as FLEXlm.
product: OpenLM Version 26 (legacy)
---

> **OpenLM Version 26 (legacy).** This page documents the legacy product, not OpenLM Platform.

Follow these steps to monitor NI Volume License Manager (NI VLM) with OpenLM, including the licenses that NI VLM disconnects for computers that are isolated from your network. NI VLM runs a FlexNet license server, so OpenLM Broker queries it with `lmutil`, as it does a FLEXlm license server. With the **NIVLM** license manager type, Broker also runs `nivlmcmd.exe`, the command-line tool of NI VLM, to export the disconnected licenses, and reports each one to OpenLM SLM as a borrowed license. In EasyAdmin, you then see which computer holds each disconnected license and when it expires.

## Requirements

Before starting, make sure you have:

- OpenLM SLM, with access to EasyAdmin.
- OpenLM Broker v26.7.8.1247 or higher, installed on the NI VLM server machine and reporting to OpenLM SLM. Earlier Broker releases do not list **NIVLM** as a license manager type. Broker must run on that machine, because it runs `nivlmcmd.exe` locally.
- NI Volume License Manager 2025 Q4 or higher. NI added the `disconnected-usage` export to `nivlmcmd.exe` in that version.
- `nivlmcmd.exe` in the NI VLM installation folder, by default `C:\Program Files (x86)\National Instruments\Volume License Manager\nivlmcmd.exe`.
- A Broker service that runs with administrator rights on the NI VLM server. `nivlmcmd.exe` does not run without them.
- The Main Licensing Port of NI VLM. The default is `27000`. To check it, open NI VLM and go to **Tools → Preferences → General**.

## Monitoring capabilities

With the **NIVLM** type, Broker sends OpenLM SLM the same `lmstat` report of the license server as the **FLEXlm** type, with 2 changes:

- **Disconnected licenses:** Broker adds each license from the `nivlmcmd.exe` export to its feature, as a borrowed license. It raises both the issued total and the in-use count of the feature by the number of disconnected licenses that it adds.
- **Reservations:** Broker removes every reservation line from the report, and subtracts the reserved licenses from the licenses in use. In the `lmstat` report of NI VLM, disconnected licenses appear among the reservations for host groups, and the report does not show which reservations are disconnected.

For each disconnected license, Broker reports:

- **Feature name**: the `PackageName` value of the export, for example `LabVIEW_Pro_PKG`.
- **Username** and **Workstation**: the computer name in `ClientName`. From NI VLM 2026 Q3, NI disconnects only computer-based licenses.
- **Start time**: the `CreationDateTimeUTC` value, when NI VLM created the disconnected license.
- **Linger time**: the time from `CreationDateTimeUTC` to `ExpirationDateTimeUTC`, the expiration of the disconnected license.

## How OpenLM interfaces with NI VLM

*How OpenLM collects NI VLM license usage*

Broker runs on the NI VLM server machine and sends the license data to OpenLM SLM. For NI VLM, it runs 2 command-line tools and reads no log file.

- **Commands:** The **Data Inquiry** command holds 2 commands, separated by a semicolon, and runs every 55 seconds by default:

    ```text
    "<Executable path>lmutil" lmstat -a -c <port>@<Host> -i;"<Executable path>nivlmcmd.exe" disconnected-usage {$destination_path}
    ```

    Broker runs `lmutil` first and `nivlmcmd.exe` second, on every run. A failure of one does not stop the other.
- **Export:** `nivlmcmd.exe` writes the licenses that are disconnected at that moment to a CSV file named after the date and time, such as `nivlm-disconnected-usage-2026-10-23_09-15-42.csv`. Broker replaces `{$destination_path}` with the `nivlm` folder of the Broker installation, reads the newest file there, and deletes all but the 2 newest files. A file has 1 row per disconnected license:

    ```text
    LicenseName,PackageName,ClientName,IsUser,HostIdLockedTo,CreationDateTimeUTC,ExpirationDateTimeUTC,ReconnectDateTimeUTC,ReconnectReason
    LabVIEW Professional Development System,LabVIEW_Pro_PKG,WS-1001,False,0A1B2C3D4E5F,2026-10-01 08:30:00,2027-01-31 22:59:59,,
    ```

    Broker reads `PackageName`, `ClientName`, `CreationDateTimeUTC`, and `ExpirationDateTimeUTC`, and ignores the other columns.
- **Report:** Broker adds each row to the `Users of <PackageName>:` block of the `lmstat` output, in the form of a borrowed license, with the linger time in seconds:

    ```text
        WS-1001 WS-1001 WS-1001 (nivlm01.example.com/27000 1), start Thu 10/1 08:30 (linger: 10592999)
    ```

    Broker adds a row only when the `lmstat` output has a block for its `PackageName`, and drops the other rows.
- **Sessions:** Each data inquiry reports the licenses that are disconnected now. When the NI VLM administrator reconnects a computer, its licenses leave the export, so the next report no longer holds them.
- **Log files:** None. The **NIVLM** type defines no log file type of its own, and the **Log Files** tab offers only **Other**.

## Check NI VLM

Broker reports only what `nivlmcmd.exe` exports, so run the export by hand on the NI VLM server first.

1. Close NI Volume License Manager in every session on the server, including disconnected Remote Desktop sessions of other users.

    `nivlmcmd.exe` does not run while the NI VLM user interface is open.

2. Open Command Prompt as administrator, and run the export to a folder that exists, for example `C:\Temp`:

    ```bat
    "C:\Program Files (x86)\National Instruments\Volume License Manager\nivlmcmd.exe" disconnected-usage C:\Temp
    ```

    The tool answers `Report exported successfully to`, followed by the path of the new CSV file.

3. Open the CSV file, and confirm that it lists the disconnected licenses that you expect, with 1 row per license.

## OpenLM Broker configuration

:::note
Install OpenLM Broker on the NI VLM server machine and confirm that it reports to OpenLM SLM before starting these steps.
:::

1. Open a browser on the NI VLM server machine and go to the [Broker web UI](https://www.openlm.com/documentation/legacy/openlm-broker/openlm-broker-webui) at [http://localhost:5090/](http://localhost:5090/).

2. On the **License Managers** page, set **Host** to the host name of the NI VLM server machine, and select the save icon next to the field.

    Set **Host** before you add the license manager, because Broker writes the host name into the `lmutil` command when you add it.

3. If Broker already monitors this NI VLM server as **FLEXlm**, note the settings of that license manager, such as the license file path, and delete it from the **License Managers** list.

    Broker refuses a port that another license manager on this Broker already uses, even a disabled one, and the **NIVLM** type queries the same port.

4. Go to **License Managers** → **Add License Manager**.

5. From **LM Type**, select **NIVLM**, not **FLEXlm**.

6. In **Port**, enter the Main Licensing Port of NI VLM, for example `27000`, and select **Add**.

    *Add NI VLM as a license manager*

7. On the **Commands** tab, select **Data Inquiry**, and change the path of `nivlmcmd.exe` in the command.

    Broker fills in both commands with the **Executable path**, the `tools64` folder of the Broker installation. `lmutil` runs from that folder, but `nivlmcmd.exe` is in the NI VLM installation folder. Replace the path in front of `nivlmcmd.exe` with that folder, and leave the rest of the command as it is:

    ```text
    "C:\Program Files\OpenLM\OpenLM Broker\tools64\lmutil" lmstat -a -c 27000@nivlm01.example.com -i;"C:\Program Files (x86)\National Instruments\Volume License Manager\nivlmcmd.exe" disconnected-usage {$destination_path}
    ```

    Keep `{$destination_path}`. Broker reads the export only from the `nivlm` folder of the Broker installation, and replaces `{$destination_path}` with that folder when the command runs. Broker runs the command every 55 seconds (**Watch interval (sec)**).

    *Point the Data Inquiry command at nivlmcmd.exe*

    When you change **Executable path** later, or select **Restore Default**, Broker puts back the default command. Change the path of `nivlmcmd.exe` again afterwards.

8. Leave the **Vendors** and **Log Files** tabs as they are, and select **Save**.

    The **Vendors** tab lists a vendor named **NIVLM**, which Broker adds for this type.

## OpenLM SLM configuration

Approve the license server with the **FLEXlm** type. The report of the **NIVLM** type is `lmstat` output with the disconnected licenses added, and OpenLM SLM reads it as FLEXlm output.

1. Open EasyAdmin (`http://<Server IP>:5015`) and go to **Start → Widgets → License Manager - Servers**.
2. Select the **There are N servers pending approval** link at the top of the widget.

    The **Administration - License Manager Servers** window opens, with the pending entries at the top of the list.

3. Find the pending entry with the host name and the port of the NI VLM server, as you configured them in Broker, and select the edit icon at the end of its row.
4. Set the **Type** to **FLEXlm**, optionally rename the connection in **Display name**, confirm the **Host Name** and **Port**, and select **APPROVE**.

## Verify your configuration

1. Open EasyAdmin in your browser.
2. Go to **Start → Widgets → License Manager - Servers**.
3. Confirm that the NI VLM license server appears with the type **FLEXlm** and the status **Up to date**, and that **Borrowed** includes the disconnected licenses.
4. Go to **Start → Operational → Currently Consumed Licenses**, and confirm that each disconnected license appears with a check mark in **Borrowed**, the computer name in **Username** and **Workstation**, and its expiration in **Linger Due**.

## Troubleshooting

Broker writes the messages of this license manager to `port-<port>-NIVLM.log`, for example `port-27000-NIVLM.log`, in the `logs` folder of the Broker installation. The messages in this section are `ERROR` messages, so they appear at the default log level. Compare the log with these cases:

- **`NiVLM nivlmcmd sub-command failed`**, followed by the reason. Broker cannot run `nivlmcmd.exe`. Check the path of `nivlmcmd.exe` in the **Data Inquiry** command, as described in [OpenLM Broker configuration](#openlm-broker-configuration).
- **`NiVLM nivlmcmd produced no CSV content in`**, followed by the folder. The `nivlm` folder holds no export. Run the export by hand, as described in [Check NI VLM](#check-ni-vlm). If the tool answers `Error 17001: NI Volume License Manager is already running.`, the NI VLM user interface is open in a session on the server. Close it in every session. If the export works by hand but not from Broker, check that the Broker service runs with administrator rights. Without them, `nivlmcmd.exe` answers `Please run the application as an administrator.`
- **`NiVLM lmutil sub-command produced no output`**. Broker cannot query the license server. Check the port and **Host** of the license manager.

If a disconnected license is in the export but not in OpenLM, compare its `PackageName` with the features of the license server. Broker adds a row only to a feature that the `lmstat` output lists with the same name, and drops the other rows without an `ERROR` message.

## Known limitations

These limits apply to NI VLM monitoring with the **NIVLM** type:

- Broker exports only the licenses that are disconnected at the time of the data inquiry. OpenLM gets no history of the licenses that NI VLM disconnected before you configured the license manager.
- Broker removes every reservation line from the `lmstat` report, including reservations that are not disconnected licenses. OpenLM shows no reservations for this license server.
- Each disconnected license arrives with the computer name as both the username and the workstation.
- A disconnected license that never expires, `Permanent` in the export, has no linger time. Broker adds it without one, so it is not marked as borrowed.
- When `nivlmcmd.exe` fails, Broker reads the newest export that is already in the `nivlm` folder. OpenLM then keeps showing the disconnected licenses of that export until an export succeeds.
- The **NIVLM** type has no **FlexLM Debug Log File** log type, the log from which the **FLEXlm** type reads denials.
- The default **Data Inquiry** command looks for `nivlmcmd.exe` in the Broker tools folder. Change its path by hand, as described in [OpenLM Broker configuration](#openlm-broker-configuration).
- **Detect** on the **License Managers** page does not add NIVLM license managers. Add the license manager by hand.