Interfacing the Sentinel HASP license manager - AN3001f - OpenLM Software License Management
Israel +972 4 6308447         USA +1 866 806 2068        UK +44 20 8242 6492      JAPAN +81 3 45208991 担当:萩原

Interfacing the Sentinel HASP license manager – AN3001f


OpenLM supports license monitoring of a wide, and ever growing variety of license managers.

This application note elaborates the steps required to configure OpenLM to interface Sentinel HASP, to monitor license usage and obtain license statistics. OpenLM only supports HASP versions 5.0 and higher. Versions 4 and lower are not supported.

Introducing a new Sentinel HASP server:

Introduce a new Sentinel HASP server under the License Servers tab:

  1. Select the License Servers tab.

  2. Click Add

  3. From the Type drop-down menu, select  HASP.

  4. Insert a description in the Description text box.

  5. Set the Time Zone to where the License Server physically sits.

  6. Submit an the appropriate Hostname and Port numbers. The HASP default port is 1947

  7. Is Triad Configuration: This configuration is reserved for FlexLM license managers only. Keep it unchecked.

  8. OpenLM Server queries license manager check box: Keep checked (The OpenLM Server actively queries the license manager) .

  9. Click Apply, and then consecutively Restart now button. The Sentinel HASP server is now ready to interface with OpenLM.


Enabling the OpenLM server to work with Sentinel HASP:

If the OpenLM Server is installed on the same machine as the HASP license server, then no additional setting is required. If OpenLM Server is installed on a different machine than the HASP server, follow these actions:

  • Open the Sentinel Hasp Admin Control Center port (default 1947) on firewall.

  • In the Configuration tab, under the Basic Settings tab, change the settings of Sentinel Hasp Admin Control Center to check the box to  Allow Remote Access to ACC . See the image below for clarification.


EasyAdmin web application.

  • Open the EasyAdmin web application.

  • Click EasyAdmin Start → Management → License servers.

  • The “License Servers” window appears. Verify that the configured  HASP license manager appear on the list. A green circle node indicates an active connection to a license server.